Roving Networks RN-370 Instrukcja Użytkownika Pobierz pdf (Strona 50)

Wireless Products Division

CONFIDENTIAL

Lab 3: Join Modes

 Useful for Module to Associate with

Network Automatically

 Association Controlled with join Command

or join Parameter Setting

 Turn Off Auto-Join & Join Manually

 Enter command mode

 factory R & reboot

 Associate module with AP

 set wlan join 0

 save & reboot

 Enter command mode

 Join

 Modules associates with AP

 Auto-Associate with Any Open-Security AP

 set wlan ssid <string>

 set wlan join 2

 set wlan auth 0

 save & reboot

 Module attempts to join any open network (no security)

TIP: If Network is Secure, Set Pass Phrase with

“set wlan pass <password>” before Joining Network

Value Policy

0 Manual. Do not join automatically.

1 Attempt to join the AP that matches the stored SSID,

pass phrase & channel. Channel can be set to 0 for

scanning. (Default)

2 Join any AP with security matching the stored

authentication mode. This setting ignores the stored

SSID and searches for the AP with the strongest

signal. The channels searched can be limited by

setting the channel mas.

3 Reserved. Do not use.

4 Create an ad hoc network using the stored SSID, IP

address & netmask. You must set the channel.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 69 70

Brak uwag

Roving Networks RN-370 Instrukcja Użytkownika Strona 50